INSTALLING THE QUILLS VERSION 2

Install the Night Quill actuator first by aligning to the cans valve before placing the cap in place. Push downwards on each side of the black collar clip until you hear a click on the rim.

Now gently push forward and over the coloured trigger pad so that you can easily place the cap onto the can.

When installing on tighter coloured donuts use both hands to push down and forwards until the clip is fully engaged and as far forward as possible.

NOTE: PLEASE DON’T FORCE THE COLLAR CLIP OFF OF THE RIM.

Now insert the cap in a central position between the clip opening or swivel the coloured trigger into position.

Your cap should face forward evenly between the front collar opening.

Note: If the cans donut is too think and an obstruction please remove the donut and attach again.

TAKING ADAPTERS OFF

To release the Collar clip push firmly on the from side edge of the right or left side then gently pry the opposite side front edge off of the rim and let go of the clip to release and roll off of the valve.

Note: Please make sure you don’t force the collar (Black part) clip on or off of the rim on Version 1 Adapters.

See video below for visual of the simple installation.